Author: Bargalló, E.
Paper Title Page
TUPAF068 Functional Integration of the RFQ in the ESS Systems 890
  • J.S. Schmidt, E. Bargalló, T. Fay, G. Hulla, B. Lagoguez, R. Montaño, E. Sargsyan, S. Scolari, H. Spoelstra
    ESS, Lund, Sweden
  • A.C. Chauveau, M. Desmons, O. Piquet
    CEA/IRFU, Gif-sur-Yvette, France
  • A.J. Johansson
    Lund University, Lund, Sweden
  • W. Ledda
    Vitrociset s.p.a, Roma, Italy
  The 352 MHz Radio Frequency Quadrupole (RFQ) for the European Spallation Source ERIC (ESS) will be delivered during 2018. After delivery, installation and tuning of the cavity, the high power RF conditioning will be performed. At this point all the different systems that are needed to condition and operate the RFQ have to be in place and operational. This paper will give an overview of the system analysis that has been performed for the RFQ. The RFQ requirements for the RF system, including the RF distribution system (RFDS), the Low Level RF (LLRF) and the local RF protection system (RFLPS) will be presented. In addition, the paper covers the system integration of the structure in the ESS control and vacuum systems as well as the outcome of a machine protection analysis.  
DOI • reference for this paper ※  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
WEPAF088 Machine Protection Features of the ESS Beam Current Monitor System 2058
  • H. Hassanzadegan, E. Bargalló, S.G. Gabourin, T. Korhonen, S. Kövecses de Carvalho, A. Nordt, T.J. Shea
    ESS, Lund, Sweden
  • M. Mohammednezhad
    Sigma Connectivity Engineering, Lund, Sweden
  • M. Werner
    DESY, Hamburg, Germany
  The BCM system of the European Spallation Source includes several machine protection features to ensure that the actual beam parameters will be consistent with the selected beam and destination modes. Differential current measurements with several ACCT pairs are foreseen to detect beam losses particularly in the low-energy linac where Beam Loss Monitors cannot be used. The ACCTs will also be used to check that no beam will be present in the sections downstream of a temporary beam dump. These measurements will then be used to stop the beam shortly after an abnormal condition has been detected by the BCM system. This will require some customized interfaces with the Timing System and the Machine Protection System as well as an optical interface for differential current measurement over large distances. Automatic setting of the machine protection thresholds and masking/unmasking of the interlocks based on the beam and destination modes are among the technical complexities. This paper gives an overview of the design including the most recent updates and discusses in more details the machine protection features of the BCM system.  
DOI • reference for this paper ※  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)