Author: Campese, T.J.
Paper Title Page
TUZGBF5 KlyLac Prototyping for Borehole Logging 1244
 
  • A.V. Smirnov, R.B. Agustsson, M.A. Harrison, A.Y. Murokh, A.Yu. Smirnov
    RadiaBeam Systems, Santa Monica, California, USA
  • S. Boucher, T.J. Campese, K.J. Hoyt
    RadiaBeam, Marina del Rey, California, USA
  • E.A. Savin
    MEPhI, Moscow, Russia
  • A.A. Zavadtsev
    Nano, Moscow, Russia
 
  Funding: Work supported by the U.S. Department of Energy (award No. DE-SC0015721)
Linac-based system for borehole logging exploits KlyLac approach combing klystron and linac sharing the same electron beam, vacuum volume, and RF network enabling self-oscillation due to a positive feedback. The KlyLac prototype design tailors delivering ~1 MeV electrons in a linac section using part of the beam injected from a sheet beam klystron (SBK). The linac part is based on a very robust, high group velocity, cm-wave, and a standing wave accelerating structure of a 'cross-pin' type supplied by a sampler. The SBK part features a permanent magnet solenoid focusing, relatively low voltage, and high aspect ratio beam. The main SBK characteristics (perveance, power, and efficiency) are expected to be similar to that for a magnetron.
 
slides icon Slides TUZGBF5 [3.285 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUZGBF5  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPMF028 Coherent Stacking Scheme for Inverse-Compton Scattering at MHz Repetition Rates 4103
 
  • P. Piot, D. Mihalcea
    Northern Illinois University, DeKalb, Illinois, USA
  • T.J. Campese, A.Y. Murokh
    RadiaBeam Systems, Santa Monica, California, USA
  • D. Mihalcea, P. Piot, J. Ruan
    Fermilab, Batavia, Illinois, USA
 
  Funding: Work sponsored by the DNDO award 2015-DN-077-ARI094 to Northern Illinois University and US DOE contract DE-AC02-07CH11359 to Fermilab.
An experiment to produce 1-MeV gamma rays via Compton back-scattering of infrared photons on 250-MeV electron bunches is currently in preparation at the Fermilab Accelerator Science & Technology (FAST) facility. To increase the gamma-ray flux the energy of the infrared laser pulses are planned to be amplified within the interaction region using a resonant cavity. This passive amplifier composed of a Fabry-Perot cavity will allow the laser pulse bunches to coherently and constructively stack. Our estimates, based on theoretical models, show that the laser pulse energy can be increased from approximately 1-2 mJ at the exit of the last active amplifier to 5 -10 mJ at the interaction point when the laser repetition rate is set at the nominal value of 3 MHz. This paper details the cavity design option(s) and associated wave-optic simulations.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMF028  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)