Author: Chavanne, J.
Paper Title Page
MOPMF088 Preparation Activity for the Siddharta-2 Run at DAΦNE 334
 
  • C. Milardi, D. Alesini, S. Bini, O.R. Blanco-García, M. Boscolo, B. Buonomo, S. Cantarella, S. Caschera, A. D'Uffizi, A. De Santis, G.O. Delle Monache, D.G.C. Di Giulio, G. Di Pirro, A. Drago, L.G. Foggetta, A. Gallo, R. Gargana, A. Ghigo, S. Guiducci, S. Incremona, F. Iungo, C. Ligi, M. Maestri, A. Michelotti, L. Pellegrino, R. Ricci, U. Rotundo, L. Sabbatini, C. Sanelli, G. Sensolini, A. Stecchi, A. Stella, A. Vannozzi, M. Zobov
    INFN/LNF, Frascati (Roma), Italy
  • G. Castorina
    INFN-Roma1, Rome, Italy
  • J. Chavanne, G. Le Bec, P. Raimondi
    ESRF, Grenoble, France
 
  DAΦNE, the Frascati lepton collider working at the c.m. energy of the F resonance, continues to be a very suitable infrastructure to realize experiments aimed at studying elementary particles and nuclear physics. The motivations of this long lasting interest are related to the DAΦNE ability of increasing its performances in terms of luminosity thanks to the innovative Crab-Waist collision scheme. In this framework, a new run for the SIDDHARTA-2 experiment has been planned in the year 2019. The detector presently installed in the interaction region, KLOE-2, will be removed and a new low-beta session, equipped with new permanent magnets quadrupoles, will be installed. Diagnostics tools will be improved especially the ones used to keep under control the beam-beam interaction. The horizontal feedback in the positron ring will be potentiated in order to achieve a higher positron current. The design and development work done in view of the SIDDHARTA-2 run is presented and discussed.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF088  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPMK009 Status of the ESRF-EBS Magnets 2648
 
  • C. Benabderrahmane, J.C. Biasci, J-F. B. Bouteille, J. Chavanne, L. Eybert, L. Goirand, G. Le Bec, L. Lefebvre, S.M. Liuzzo, D. Martin, C. Penel, P. Raimondi, J.-L. Revol, F. Villar, S.M. White
    ESRF, Grenoble, France
 
  The ESRF-EBS (Extremely Brilliant Source) is an upgrade project planned at the European Synchrotron Radiation Facility (ESRF) in the period 2015-2022. A new storage ring will be built, aiming to decrease the horizontal emittance and to improve the brilliance and coherence of the X-ray beams. The lattice of the new storage ring relies on magnets with demanding specifications: dipoles with longitudinal gradient (field ranging from 0.17 T up to 0.67 T), strong quadrupoles (up to 90 T/m), combined function dipole-quadrupoles with high gradient (0.57 T and 37 T/m), strong sextupoles and octupoles. The design of these magnets is based on innovative solutions; in particular, the longitudinal gradient dipoles are permanent magnets and the combined dipole-quadrupoles are single-sided devices. The longitudinal gradient dipoles have been assembled and measured in house. The design of the magnets, production status and magnetic measurement results will be presented.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPMK009  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THXGBD3 Status of the ESRF-Extremely Brilliant Source Project 2882
 
  • J.-L. Revol, C. Benabderrahmane, P. Berkvens, J.C. Biasci, J-F. B. Bouteille, T. Brochard, N. Carmignani, J.M. Chaize, J. Chavanne, F. Cianciosi, A. D'Elia, R.D. Dimper, M. Dubrulle, D. Einfeld, F. Ewald, L. Eybert, G. Gautier, L. Goirand, L. Hardy, J. Jacob, B. Joly, M.L. Langlois, G. Le Bec, I. Leconte, S.M. Liuzzo, C. Maccarrone, T.R. Mairs, T. Marchial, H.P. Marques, D. Martin, J.M. Mercier, A. Meunier, M. Morati, J. Pasquaud, T.P. Perron, E. Plouviez, E. Rabeuf, P. Raimondi, P. Renaud, B. Roche, K.B. Scheidt, V. Serrière, P. Van Vaerenbergh, R. Versteegen, S.M. White
    ESRF, Grenoble, France
 
  The ESRF - the European Synchrotron Radiation Facility - is a user facility in Grenoble, France, and the source of intense high-energy (6 GeV) X-rays. In 2019, the existing storage ring will be removed and a new lattice will be installed in its place, dramatically reducing the equilibrium horizontal emittance. This 'fourth-generation' synchrotron will produce an X-ray beam 100 times more brilliant and coherent than the ESRF source today. The Extremely Brilliant Source (EBS) project was launched in 2015 and is now well underway, on track for its scheduled completion in 2020. The design is completed, the procurement in full swing, the assembly has started, and critical installation activities are being prepared. The current status, three years into the project, will be revealed, along with the expected performance of the accelerator and the technical challenges involved. This paper will focus on the implementation of the project.  
slides icon Slides THXGBD3 [13.552 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THXGBD3  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPAL017 From design to alignment of ThomX quadrupoles 3660
 
  • C. Vallerand, R. Marie, H. Monard
    LAL, Orsay, France
  • J. Campmany, J. Marcos, V. Massana
    ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain
  • J. Chavanne, G. Le Bec
    ESRF, Grenoble, France
  • M.-E. Couprie, A. Lestrade, A. Loulergue, F. Marteau, M. Ros
    SOLEIL, Gif-sur-Yvette, France
 
  Quadrupoles for Thomx Facility have been carefully designed and measured due to high constraints of the storage ring. The need of a compact accelerator, 70 m2 on floor, as well as a beam life time of 20 ms, led to the following requirements for the quadrupole : a gradient of 5 T/m with 20.5 mm radius bore, harmonic content better than few 1.10-3 at the reference radius of 18 mm, no cross-talk with sextupole placed within 5 cm and a precision of the magnetic axis of 100 µm and the roll angle of 300 µrad for measurements and alignment. Total of 41 quadrupoles have been built and all measured by a rotating coil at ALBA and SOLEIL, providing multipole components, transfer function and magnetic center. Cross-check measurements have also been carried out with a versatile stretched wire from ESRF at LAL. This paper mainly describes results of simulations with OPERA and RADIA and provides the results of measurements with these three benches. These results will be compared and highlighted important points for the alignment and installation of quadrupoles in an accelerator.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAL017  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPMF019 ESRF-EBS Lattice Model with Canted Beamlines 4081
 
  • S.M. Liuzzo, N. Carmignani, J. Chavanne, L. Farvacque, T.P. Perron, P. Raimondi, S.M. White
    ESRF, Grenoble, France
 
  The ESRF Extremely Brilliant Source (ESRF-EBS) lattice model is updated to include three canted beamlines. The cells are modified where necessary to include 3-Pole Wiggler (3PW), 2-Pole Wiggler (2PW) and Short Bending Magnet (SBM) sources. Several lattices are obtained for the different stages that will bring from commissioning to operation with users. A scheme for tune modification keeping key optics knobs unchanged is proposed.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMF019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)