02 Photon Sources and Electron Accelerators
A18 Energy Recovery Linacs
Paper Title Page
TUPMF024 Validation of the Halbach FFAG Cell of Cornell-BNL Energy Recovery Linac 1304
 
  • F. Méot, S.J. Brooks, D. Trbojevic, N. Tsoupas
    BNL, Upton, Long Island, New York, USA
 
  Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
The optical properties of the Halbach technology based CBETA ERL return FFAG arc cell are investigated, using its 3-D OPERA field map model. This includes paraxial and large amplitude motion, tune path, study of resonances, dynamic acceptance, effects of various defects, 300-cell 10k-particle bunches 6D transmission trials. These investigations, a 2~3 year investment, have validated the Halbach technology in the linear FFAG cell application, from the point of view of the beam dynamics, so supporting its approval as the required technology for CBETA, in December 2016.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF024  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPMF034 Status Report of the Berlin Energy Recovery Linac Project BERLinPro 4127
 
  • M. Abo-Bakr, W. Anders, Y. Bergmann, K.B. Bürkmann-Gehrlein, A.B. Büchel, P. Echevarria, A. Frahm, H.-W. Glock, F. Glöckner, F. Göbel, B.D.S. Hall, S. Heling, H.-G. Hoberg, A. Jankowiak, C. Kalus, T. Kamps, G. Klemz, J. Knobloch, J. Kolbe, G. Kourkafas, J. Kühn, B.C. Kuske, J. Kuszynski, A.N. Matveenko, M. McAteer, A. Meseck, R. Müller, A. Neumann, N. Ohm, K. Ott, E. Panofski, F. Pflocksch, L. Pichl, J. Rahn, M.A.H. Schmeißer, O. Schüler, M. Schuster, J. Ullrich, A. Ushakov, J. Völker
    HZB, Berlin, Germany
  • A. Bundels
    Helmholtz-Zentrum Berlin für Materialien und Energie GmbH (HZB), Berlin, Germany
 
  Funding: Work supported by the German Bundesministerium für Bildung und Forschung, Land Berlin and grants of Helmholtz Association
The Helmholtz-Zentrum Berlin is constructing the Energy Recovery Linac Prototype BERLinPro, a demonstration facility for the science and technology of ERLs for future light source applications. BERLinPro is designed to accelerate a high current (100 mA, 50 MeV), high brilliance (norm. emittance below 1 mm mrad) cw electron beam. We report on the last year's progress, including the comissioning of the gun module as the first SRF component to be installed in BERLinPro.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMF034  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPMF062 Smith-Purcell Radiation for Bunch Length Measurements at the Injection of MESA 4213
SUSPF021   use link to see paper's listing under its alternate paper code  
 
  • P. Heil
    IKP, Mainz, Germany
  • K. Aulenbacher
    HIM, Mainz, Germany
 
  Funding: Federal Ministry of Education and Research
MELBA is a test apparatus for the injector of the energy recovering, superconducting accelerator MESA in Mainz. A chopper-buncher system containing two circularly deflecting cavities and a first and second harmonic buncher cavity have been built. They serve to produce short bunches with a longitudinal extension < 600 μm (one degree of RF-phase) in the longitudinal focus for beam currents of up to 10mA. We intend to use Smith-Purcell Radiation (SPR) to test this arrangement. SPR is generated if a charged particle passes close to a periodic metallic structure, e.g. a grating. The signal has a coherent part which increases its intensity quadratically with the bunch charge if the bunch length is smaller than or comparable to the grating period. Different gratings can be placed below the electron beam to determine the length of the electron bunches. This measurement is non-destructive. The generated THz radiation will be observed with a bolometer cooled down to 4.2K which offers sufficient sensitivity in our regime of operation.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMF062  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPMF063 The MESA 15 kW cw 1.3 GHz Solid State Power Amplifier Prototype 4216
 
  • R.G. Heine, F. Fichtner
    IKP, Mainz, Germany
 
  The Mainz Energy recovering Superconducting Accelerator MESA is a multi-turn energy recovery linac with beam energies in the 100 MeV regime currently designed and build at Institut für Kernphysik (KPH) of Johannes Gutenberg-Universität Mainz. The main accelerator consists of two superconducting Rossendorf type modules, while the injector MAMBO (MilliAMpere BOoster) relies on normal conducting technolgy. The high power RF system is planned completely in solid state technology. With the high power demands of the normal conducting RF cavities up-to-date transistor technology with increased power density has to be used. A 15 kW CW power ampifier prototype with the new technology has been developed by Sigma Phi Electronics and deliverd to KPH. In this paper we will present the results of the performance measurements of the amplifier.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMF063  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPMK105 PERLE - Lattice Design and Beam Dynamics Studies 4556
 
  • S.A. Bogacz, D. Douglas, F.E. Hannon, A. Hutton, F. Marhauser, R.A. Rimmer, Y. Roblin, C. Tennant
    JLab, Newport News, Virginia, USA
  • D. Angal-Kalinin, J.W. McKenzie, B.L. Militsyn, P.H. Williams
    Cockcroft Institute, Warrington, Cheshire, United Kingdom
  • G. Arduini, O.S. Brüning, R. Calaga, K.M. Dr. Schirm, F. Gerigk, B.J. Holzer, E. Jensen, A. Milanese, E. Montesinos, D. Pellegrini, P.A. Thonet, A. Valloni
    CERN, Geneva, Switzerland
  • S. Bousson, D. Longuevergne, G. Olivier, G. Olry
    IPN, Orsay, France
  • I. Chaikovska, W. Kaabi, A. Stocchi, C. Vallerand
    LAL, Orsay, France
  • B. Hounsell, M. Klein, U.K. Klein, P. Kostka, C.P. Welsch
    The University of Liverpool, Liverpool, United Kingdom
  • E.B. Levichev, Yu.A. Pupkov
    BINP SB RAS, Novosibirsk, Russia
 
  Funding: Work has been authored by Jefferson Science Associates, LLC under Contract No. DE-AC05-06OR23177 with the U.S. Department of Energy.
PERLE (Powerful ERL for Experiments) is a novel ERL test facility, initially proposed to validate choices for a 60 GeV ERL foreseen in the design of the LHeC and the FCC-eh. Its main thrust is to probe high current, CW, multi-pass operation with superconducting cavities at 802 MHz (and perhaps testing other frequencies of interest). With very high virtual beam power (~ 10 MW), PERLE offers an opportunity for controllable study of every beam dynamic effect of interest in the next generation of ERL design; becoming a ‘stepping stone' between present state-of-art 1 MW ERLs and future 100 MW scale applications. PERLE design features Flexible Momentum Compaction lattice architecture for six vertically stacked return arcs and a high-current, 6 MeV, photo-injector. With only one pair of 4 cavity cryomodules, 400 MeV beam energy can be reached in 3 re-circulation passes, with beam currents in excess of 15 mA. The beam is decelerated in 3 consecutive passes back to the injection energy, transferring virtually stored energy back to the RF. This unique facility will serve as a test-bed for high current ERL technologies, as well as a user facility in low energy electron and photon physics.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMK105  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPML087 First ERL Operation of S-DALINAC and Commissioning of a Path Length Adjustment System 4859
 
  • M. Arnold, C. Burandt, R. Grewe, J. Pforr, N. Pietralla, M. Steinhorst
    TU Darmstadt, Darmstadt, Germany
  • C. Eschelbach, M. Lösler
    Frankfurt University of Applied Sciences, Frankfurt am Main, Germany
  • F. Hug
    KPH, Mainz, Germany
 
  Funding: Work supported by DFG through GRK 2128 and INST163/383-1/FUGG
The S-DALINAC is running in recirculating operation since 1991. In 2015/2016 a major upgrade was performed by adding a third recirculation beam line. The versatility of this recirculation beam line enables a phase shift of the beam of up to 360° of the RF phase. The required range of 10 cm for a 3 GHz RF frequency is realized by a path length adjustment system. A complementary operation in normal scheme (single-pass, once or thrice recirculating with acceleration) or ERL mode (once or twice) is possible by appropriate adjustment of this system. After installation this system was aligned properly and its functionality and stroke was checked without beam. The system was commissioned by measuring the change of the beam phase in dependency of the setting of the path length adjustment system. The complementary usage of the newly installed recirculation for once recirculating with acceleration and once recirculating with ERL mode has been shown successfully in autumn 2017. This contribution will provide an overview on the path length adjustment system and the first run of the once recirculating ERL mode of the S-DALINAC.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPML087  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)