07 Accelerator Technology
T19 Collimation
Paper Title Page
WEPMF071 Dynamic Testing and Characterization of Advanced Materials in a New Experiment at CERN HiRadMat Facility 2534
  • A. Bertarelli, C. Accettura, E. Berthomé, L. Bianchi, F. Carra, C. Fichera, M.I. Frankl, G. Gobbi, P. Grosclaude, M. Guinchard, A. Lechner, M. Pasquali, S. Redaelli, E. Rigutto, O. Sacristan De Frutos
    CERN, Geneva, Switzerland
  • Ph. Bolz, P. Simon
    GSI, Darmstadt, Germany
  • T.R. Furness
    University of Huddersfield, Huddersfield, United Kingdom
  • J. Guardia Valenzuela
    Universidad de Zaragoza, Zaragoza, Spain
  • P. Mollicone, M. Portelli
    UoM, Msida, Malta
  Funding: This work has received funding from the European Union's Horizon 2020 Research and Innovation programme under Grant Agreement No 730871.
An innovative and comprehensive experiment (named "Multimat") was successfully carried out at CERN HiRadMat facility on 18 different materials relevant for Collimators and Beam Intercepting Devices. Material samples, tested under high intensity proton pulses of 440 GeV/c, exceeding the energy density expected in HL-LHC, ranged from very light carbon foams to tungsten heavy alloys, including novel composites as graphite/carbides and metal/diamond without and with thin-film coatings. Experimental data were acquired relying on extensive integrated instrumentation (strain gauges, temperature sensors, radiation-hard camera) and on laser Doppler vibrometer. This allows investigating relatively unexplored and fundamental phenomena as dynamic strength, internal energy dispersion, nonlinearities due to inelasticity and inhomogeneity, strength and delamination of coatings and surfaces. By benchmarking sophisticated numerical simulations against these results, it is possible to establish or update material constitutive models, which are of paramount importance for the design of devices exposed to interaction with particle beams in high energy accelerators such as the HL-LHC or FCC-hh.
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPMF071  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
WEPML073 Research on Magnetic Center Measurement of Quadrupole and Sextupole Using Vibrating Wire Alignment Technique in HEPS-TF 2860
  • L. Wu, C. H. Li, H. Qu, H. Wang, X.L. Wang
    IHEP, Beijing, People's Republic of China
  • H.Y. Zhu
    Institute of High Energy Physics (IHEP), People's Republic of China
  In order to meet the extremely low emittance re-quirement, the magnets in the storage ring of High Energy Photon Source(HEPS) need to have a stable support and precise positioning. Vibrating wire align-ment technique can be used to pre-align the quadru-poles and sextupoles on one girder with high preci-sion. Research of vibrating wire alignment technique is one important project of HEPS Test Facility (HEPS-TF). In HEPS-TF, the key and difficult technologies of HEPS should be researched and developed. This paper introduces the principle of the vibrating wire align-ment technique and the measurement system in brief. The magnetic center measurement of quadrupole and sextupole using vibrating wire will be introduced in detail. It concludes the measurement procedure, mag-netic field distribution, measurement repeatability, sag correction and magnet adjustment measurement. The research of vibrating wire has get a better precision than the aim. The magnetic center measurement preci-sion reach to ±3μm and the magnet adjustment error is less than 6μm.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPML073  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)