Keyword: booster
Paper Title Other Keywords Page
MOPMF001 Bunch Schedules for the FCC-ee Pre-injector linac, injection, collider, positron 79
 
  • S. Ogur, K. Oide, Y. Papaphilippou, F. Zimmermann
    CERN, Geneva, Switzerland
  • D.N. Shatilov
    BINP SB RAS, Novosibirsk, Russia
 
  The latest design of the Future Circular electron-positron Collider (FCC-ee) foresees a luminosity per interaction point above 2.0·1036/cm2/s for operation at the Z pole. The filling from zero current occurs in collision to profit from the bunch lengthening due to beamstrahlung (so-called bootstrapping). At any time when new e- and e+ buckets or bunchlets are injected into the collider, they will collide instantly. For this reason, we may provide the charge in each injected bunch in a way to pre-compensate for anticipated beam loss, and to reach the target luminosity as soon as possible after the first injection. In this way, we optimise the injection schedules for Z-mode so as to reach the peak luminosity in less than 20 minutes by interleaved injection of the two species at some portion of full bucket charge. Filling from zero the injector should allow accumulating 1.7·1011 particles in one collider bucket within at least 10 injections, assuming a total transmission above 80%. In steady-state operation, the injector chain continually produces and accelerates lower bunch charges so as to maintain nearly constant bunch currents and constant peak luminosity.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF001  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPMF002 Pre-Booster Ring Considerations for the FCC e+e Injector emittance, damping, wiggler, extraction 83
 
  • O. Etisken
    Ankara University, Faculty of Sciences, Ankara, Turkey
  • F. Antoniou, Y. Papaphilippou
    CERN, Geneva, Switzerland
  • A.K. Çiftçi
    Izmir University of Economics, Balçova/Izmir, Turkey
 
  The FCC-e+e injector complex needs to produce and to transport a high-intensity e+/e beam at a fast repetition rate for topping up the collider at its collision energy. Two different options are under consideration as pre-accelerator before the bunches are transferred to the high-energy booster: using the existing SPS and a completely new ring. The purpose of this paper is to explore the needs and parameters of the existing SPS and the conceptual design of an alternative accelerator ring with injection and extraction energies of 6 and 20 GeV, respectively. In this study, the basic parameters of both choices are established, including the optics design and layout updates. Consideration for non-linear dynamics optimization and the impact of intra beam scattering are also presented.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF002  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPMF004 Spin Dynamics in the JLEIC Alternative Pre-Booster Ring resonance, proton, polarization, dipole 87
 
  • J.L. Martinez Marin, B. Mustapha
    ANL, Argonne, USA
 
  In order to reduce the foot-print of the JLEIC ion complex, we have designed a more compact and cost-effective octagonal 3-GeV pre-booster ring half the size of the orig-inal figure-8 design. However, this new ring does not preserve ion polarization by design as the figure-8 shape, making it necessary to study the spin dynamics to find the best solution for spin correction. Different codes, Zgoubi and COSY, are used to model and simu-late the spin dynamics in the octagonal 3 GeV ring, in-cluding spin correction with Siberian snakes.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF004  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPMF005 Beam Formation in the Alternative JLEIC Ion Complex linac, collider, injection, proton 91
 
  • B. Mustapha, J.L. Martinez Marin
    ANL, Argonne, USA
  • Y.S. Derbenev, F. Lin, V.S. Morozov, Y. Zhang
    JLab, Newport News, Virginia, USA
 
  Funding: Work supported by the U.S. Department of Energy / ONP, under Contract No. DE-AC02-06CH11357 for ANL and by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177.
The proposed alternative design approach for the JLab-EIC (JLEIC) ion complex uses a more compact linac and pre-booster, and consolidates the electron storage ring (e-ring) as a large booster for the ions. Following a parameter study* showing the feasibility of this alternative design approach, we have adapted the e-ring lattice by adding RF sections to accelerate ion beams**. In this study, we focus on the beam formation for protons and lead ions from the linac to the pre-booster, then into the e-ring until injection to the ion collider ring. Effects such as space charge, intra-beam scattering and the need for beam cooling will determine the total accumulated charge in each ring and the time required from injection from the injector linac to collision in the collider ring.
* B. Mustapha et al, Proceedings of NAPAC-2016, October 9-14, Chicago, IL.
** B. Mustapha et al, Proceedings of IPAC-2017, May 14-19, Copenhagen, Denmark.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF005  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPMF054 Comparison of Different Transverse Emittance Measurement Techniques in the Proton Synchrotron Booster emittance, extraction, proton, optics 232
 
  • G.P. Di Giovanni, S.C.P. Albright, V. Forte, M.A. Fraser, G. Guidoboni, B. Mikulec, F. Roncarolo, A. Santamaría García
    CERN, Geneva, Switzerland
 
  The measurement of the transverse emittance in an accelerator is a crucial parameter to evaluate the performance of the machine and to understand beam dynamics processes. In recent years, controlling and understanding the emittance became particularly relevant in the Proton Synchrotron Booster (PSB) at CERN as part of the LHC Injectors Upgrade (LIU). The LIU project is a necessary step to achieve the goals of the High-Luminosity LHC project. In this framework, an accurate and reliable emittance measurement of high brightness beams is mandatory to study the brightness reach of the LHC injectors. In the PSB there are two main instruments available for emittance measurements: wire scanners and secondary-emission (SEM) grids. In this paper emittance measurements performed during the 2017 physics run with these two systems are compared, taking into account various systematic error sources.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF054  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPMF059 Status of the FCC-ee Top-Up Booster Synchrotron collider, optics, emittance, injection 250
 
  • B. Härer, B.J. Holzer, Y. Papaphilippou, T. Tydecks
    CERN, Geneva, Switzerland
 
  This contribution presents the status of the top-up booster synchrotron for the FCC electron-positron collider FCC-ee, which is a 100 km electron-positron collider being designed for precision studies and rare decay observations in the range of 90 to 365 GeV centre-of-mass energy. In order to keep the luminosity at a level of the order of 1035 cm-2s-1 continuous top-up injection is required, because of the short beam lifetime of less than one hour. The top-up booster synchrotron will be housed in the same tunnel as the collider rings and will ramp up the beam energy from 20 GeV at injection to the full energy between 45.5 GeV and 182.5 GeV depending on operation mode. The lattice design and two possible optics will be presented. The dynamic aperture was investigated for different sextupole schemes with and without misalignments of the lattice components. In addition, wigglers were installed to decrease the damping time and mitigate intra-beam-scattering.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF059  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPMF077 A Design Study of the Electron-driven ILC Positron Source Including Beam Loading Effect positron, beam-loading, cavity, acceleration 311
 
  • H. Nagoshi, M. Kuriki
    HU/AdSM, Higashi-Hiroshima, Japan
  • S. Kashiwagi
    Tohoku University, Research Center for Electron Photon Science, Sendai, Japan
  • K. Negishi
    Iwate University, Morioka, Iwate, Japan
  • T. Omori, M. Satoh, Y. Seimiya, J. Urakawa
    KEK, Ibaraki, Japan
  • Y. Sumitomo
    LEBRA, Funabashi, Japan
  • T. Takahashi
    Hiroshima University, Graduate School of Science, Higashi-Hiroshima, Japan
 
  The International Linear Collider (ILC) is a next-generation accelerator for high-energy physics to study the Higgs and top sector in the Standard Model, and new physics such as supersymmetry and dark matter. ILC positron source based on Electron-driven method has been proposed as a reliable technical backup. In this article, we report the design study of the positron source based on the off-the-shelf RF components. The positron is generated and accelerated in a multi-bunch format. To compensate the energy variation by the transient beam loading effect, we employ AM (Amplitude Modulation) technique and the results were 16.60 ± 0.14 MV (peak-to-peak) for L-band 2m cavity driven by 22.5 MW power and 25.76 ± 0.19 MV (peak-to-peak) for S-band 2m ac-celerator driven by 36 MW power with 0.78 A beam load-ing.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF077  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPAF005 Status of AC-Dipole Project at RHIC Injectors for Polarized Helions dipole, resonance, proton, simulation 669
 
  • K. Hock, H. Huang, F. Méot, P. Oddo, N. Tsoupas, J.E. Tuozzolo, K. Zeno
    BNL, Upton, Long Island, New York, USA
 
  Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
Polarized helions will be used in the eRHIC collider to collide with polarized electrons. To allow efficient transport of polarized helions in the Booster, to rigidities sufficiently high (B rho=10.8 T.m, |G gamma|=10.5) for minimizing the optical perturbations from the two partial helical dipoles in the AGS, an upgrade for overcoming depolarizing intrinsic resonances is needed. An AC-dipole is being designed to induce spin flips through intrinsic resonances. Booster AC-dipole operation will be established with protons while the polarized helion source is being completed. This paper reports the status of the project (which is now well advanced after two years of theoretical and design studies) and provides an overview of proof of principle experiments to take place after successful installation of the AC-dipole, during RHIC Run 19 with polarized proton beams.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAF005  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPAF006 Operation of RHIC Injectors with Isobaric Ruthenium and Zirconium Ions laser, target, ion-source, injection 672
 
  • H. Huang, E.N. Beebe, I. Blacker, J.J. Butler, C. Carlson, P.S. Dyer, W. Fischer, C.J. Gardner, D.M. Gassner, D. Goldberg, T. Hayes, S. Ikeda, J.P. Jamilkowski, T. Kanesue, N.A. Kling, C. Liu, D. Maffei, G.J. Marr, B. Martin, J. Morris, C. Naylor, M. Okamura, D. Raparia, V. Schoefer, F. Severino, T.C. Shrey, K.S. Smith, D. Steski, P. Thieberger, K. Zeno, I.Y. Zhang
    BNL, Upton, Long Island, New York, USA
  • H. Haba
    RIKEN Nishina Center, Wako, Japan
  • T. Karino
    Utsunomiya University, Utsunomiya, Japan
 
  Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
The FY18 RHIC physics program calls for Ru-Ru and Zr-Zr collisions at 100GeV using isobaric Ruthenium and Zirconium ions, each having 96 nucleons. In the injector chain, these two ions have to come from tandem and EBIS source, respectively. To reduce systematic errors in the detector, the luminosity between the two species combinations is matched as closely as possible, and the species are switched frequently. Several bunch merges are needed in the Booster and AGS to reach the desired bunch intensity for RHIC. The setup and performance of Booster and AGS with these ions are reviewed.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAF006  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPAF017 Stability Analysis of the TOP-IMPLART 35 MeV Proton Beam DTL, linac, proton, klystron 697
 
  • P. Nenzi, A. Ampollini, G. Bazzano, L. Picardi, C. Ronsivalle, V. Surrenti, E. Trinca, M. Vadrucci
    ENEA C.R. Frascati, Frascati (Roma), Italy
 
  Funding: The TOP-IMPLART program is funded by Regione Lazio.
The TOP-IMPLART (Intensity Modulated Proton Linear Accelerator for RadioTherapy) is the demonstrator of a 150 MeV proton linear accelerator devoted to cancer treatment application under development at ENEA-Frascati. It is a full linear machine composed by a 425 MHz 7 MeV injector and a high frequency linac operating at 2997.92 MHz. The first accelerating section, installed and in operation, consists of 4 SCDTL structures and delivers a 35 MeV beam in 3 microseconds pulses at a maximum repetition frequency of 50 Hz. The principal advantage of a linear accelerator, in a therapeutic application, is the quick setting possibility (up to pulse-to-pulse, in principle) of the physical properties of the proton beam, offering larger flexibility (compared to traditional circular designs) and improved precision on dose delivery to the patient., The short and long range stability of the machine have been analyzed measuring on a pulse by pulse basis both the output beam characteristics and other machine parameters in order to identify those that mainly affect the beam stability. This work describes the methodology used in this study, the main results achieved and the future developments.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAF017  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPAF074 Preliminary Modelling of Radiation Levels at the Fermilab PIP-II Linac linac, proton, GUI, radiation 898
 
  • L. Lari, C.M. Baffes, S.J. Dixon, N.V. Mokhov, I.L. Rakhno, I.S. Tropin
    Fermilab, Batavia, Illinois, USA
  • F. Cerutti, L.S. Esposito, L. Lari
    CERN, Geneva, Switzerland
 
  PIP-II is the Fermilab's flagship project for providing powerful, high-intensity proton beams to the laboratory's experiments. The heart of PIP-II is an 800-MeV superconducting linac accelerator. It will be located in a new tunnel with new service buildings and connected to the present Booster through a new transfer line. To support the design of civil engineering and mechanical integration, this paper provides preliminary estimation of radiation level in the gallery at an operational beam loss limit of 0.1 W/m, by means of Monte Carlo calculations with FLUKA and MARS15 codes.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAF074  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPMF003 Dynamic Tuning of the APS-U Booster 5-cell Cavities cavity, resonance, extraction, coupling 1251
 
  • G.J. Waldschmidt, M. Abliz, T.G. Berenc, D. Horan, U. Wienands
    ANL, Argonne, Illinois, USA
 
  The booster synchrotron for the APS-U is being upgraded to accommodate high-charge bunches, up to 20 nC, for extraction into the MBA lattice. The booster is required to operate at 85% efficiency in order to achieve bunch swap-out into the storage ring. In order to compensate for significant beam-loading effects as well as support a frequency ramp to achieve higher efficiency, a ferrite tuner is being considered to dynamically adjust the cavity frequency. A tuner design will be presented that spans 60 kHz and utilizes a low-loss YIG garnet similar to that used in the Recycler Ring at Fermilab.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF003  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPMF036 Top Off of NSLS-II with Inefficient Injector injection, linac, storage-ring, operation 1327
 
  • R.P. Fliller, A.A. Derbenev, V.V. Smaluk, X. Yang
    BNL, Upton, Long Island, New York, USA
 
  Funding: This manuscript has been authored by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy
The NSLS-II is a 3 GeV storage with a full energy injector capable of top off injection. The injector consists of a 200 MeV linac injecting a 3 GeV booster. Recent operational events have caused us to investigate 100 MeV injection into the booster. As the booster was not designed for injection at this low energy, beam loss is observed with this low energy booster injection. This beam loss not only results of overall charge loss from the train, but a change in the overall charge distribution in the bunch train. In this paper we discuss the performance of injecting into the storage ring with the inefficient charge transfer through the injector. The changes to the top off method are discussed, as well as the achieved storage ring current stability and fill pattern.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF036  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPMF037 Development of New Operational Mode for NSLS-II Injector: Low Energy 100MeV Linac-to-Booster Injection injection, operation, klystron, linac 1330
 
  • X. Yang, A.A. Derbenev, R.P. Fliller, T.V. Shaftan, V.V. Smaluk
    BNL, Upton, Long Island, New York, USA
 
  The NSLS-II injector consists of a 200 MeV linac and a 3 GeV full-energy booster synchrotron. The linac contains five traveling-wave S-band accelerating structures driven by two high-power klystrons, with a third klystron as spare. In the event that the spare klystron is not available, the failure of one klystron will prohibit the linac from injecting into the booster as the energy is too low. Therefore, we wish to develop a new operational mode that the NSLS-II injector can operate with a single klystron providing 100 MeV beam from the linac. A decremented approach with intermediate energies 170 MeV, 150 MeV, etc., takes advantages of pre-calculated booster ramps and beam based online optimization. By lowering the booster injection energy in a small step and online optimizing at each step, we were able to achieve 100 MeV booster injection. 170 MeV operation mode of the NSLS-II injector has been implemented since May 31, 2017, with a similar overall performance compared to the standard 200 MeV operation but fewer klystron trips. 100 MeV single-klystron operation has been successfully demonstrated with 20-30% overall efficiency, which is limited by booster acceptance.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF037  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPMF039 Recommissioning of the Canadian Light Source Booster Synchrotron MMI, optics, extraction, injection 1338
 
  • W.A. Wurtz, D. Bertwistle, L.O. Dallin, X. Shen, J.M. Vogt
    CLS, Saskatoon, Saskatchewan, Canada
 
  The Canadian Light Source booster synchrotron was originally commissioned in 2002 and has worked reliably for many years. However, the operating point was not the design operating point and the booster suffered from poor quantum lifetime at the extraction energy. The low quantum lifetime caused current loss of approximately 25% in the microseconds before extraction. We have recommissioned the booster using the design optics, and the current loss before extraction is now only 6%. In this paper, we discuss the measurements and simulations involved in our recommissioning work.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF039  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPMF046 The Injection and Extraction Design of the Booster for the HEPS Project injection, extraction, kicker, storage-ring 1356
 
  • Y.Y. Guo, J. Chen, Z. Duan, Y. Jiao, Y.M. Peng, G. Xu
    IHEP, Beijing, People's Republic of China
 
  The HEPS booster is a 1Hz electron synchrotron. It accelerates electron bunches from 500 MeV to final energy of 6 GeV. The vertical scheme was chosen for the injection and extraction system of the booster. What's more, an injection system from storage ring is required. The layout of the injection and extraction system were introduced in this paper. The parameter optimization and other considerations are presented in detail.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF046  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPMF052 Progress of Lattice Design and Physics Studies on the High Energy Photon Source lattice, storage-ring, injection, emittance 1375
 
  • G. Xu, X. Cui, Z. Duan, Z. Duan, Y.Y. Guo, D. Ji, Y. Jiao, J.L. Li, X.Y. Li, C. Meng, Y.M. Peng, Q. Qin, S.K. Tian, J.Q. Wang, N. Wang, Y. Wei, H.S. Xu, F. Yan, C.H. Yu, Y.L. Zhao
    IHEP, Beijing, People's Republic of China
 
  The High Energy Photon Source (HEPS) is an ultralow-emittance, kilometer-scale storage ring light source to be built in China. In this paper we will introduce the progress of the physical design and studies on HEPS over the past one year, covering issues of storage lattice design and optimization, booster design, injection design, collective effects, error study, insertion device effects, beam lifetime, etc.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF052  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPMF058 Conceptual Design of HEPS Injector storage-ring, injection, linac, dipole 1394
 
  • J.L. Li, H. Dong, Z. Duan, Y.Y. Guo, D.Y. He, Y. Jiao, W. Kang, C. Meng, S. Pei, Y.M. Peng, J.R. Zhang, P. Zhang, Z.S. Zhou
    IHEP, Beijing, People's Republic of China
 
  Abstract The High Energy Photon Source (HEPS) will be constructed in the following few years. The light source is comprised of an ultra-low emittance storage ring and a full energy injector. The energy of the storage ring is 6 GeV. The injector is comprised of a 500 MeV linac, a 500 MeV to 6 GeV booster synchrotron and transport lines connecting the machines. In the present design, the linac uses normal conducting S-band bunching and accelerating structures. The booster adopts FODO cells, has a circumference of about 454 m and an emittance lower than 40 nmrad. The injector can provide a single-bunch charge up to 2 nC at 6 GeV for the storage ring. This paper briefly introduces the conceptual design of the injector of the HEPS.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF058  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPMF059 Error Study of HEPS Booster closed-orbit, multipole, simulation, lattice 1398
 
  • C. Meng, D. Ji, J.L. Li, Y.M. Peng
    IHEP, Beijing, People's Republic of China
 
  The High Energy Photon Source (HEPS) is a 6-GeV, ultralow-emittance light source to be built in China. The injector is composed of a 500-MeV linac and a full energy booster with 1 Hz repetition frequency. The detailed error study of the booster will be presented, including misalignment errors and closed orbit correc-tion, magnetic field errors and power supply errors. The effect of errors on closed orbit, tune, chromaticity and dynamic aperture will be discussed. The dynamic aperture with multipole errors will be presented also.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF059  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPMF060 Design of Bunch Lengthening System in Electron Linac linac, photon, lattice, bunching 1401
 
  • C. Meng, Y. Jiao, J.L. Li, S. Pei, Y.M. Peng, H.S. Xu
    IHEP, Beijing, People's Republic of China
 
  The High Energy Photon Source (HEPS) is a 6-GeV, ultralow-emittance light source to be built in China. The injector is composed of a linac and a full energy booster. To increase the threshold of TMCI in the booster, the HEPS linac design has been evolved with several iterations. The important middle-version design is a 300 MeV linac with rms bunch length larger than 20 ps. One bunch lengthening system is proposed and discussed in this paper.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF060  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPMF062 Status of HEPS Booster Lattice Design and Physics Studies injection, lattice, storage-ring, extraction 1407
 
  • Y.M. Peng, Z. Duan, Y.Y. Guo, D. Ji, Y. Jiao, J.L. Li, C. Meng, S.K. Tian, H.S. Xu
    IHEP, Beijing, People's Republic of China
 
  The High Energy Photon Source (HEPS) with an ul-tralow emittance is proposed to be built in Beijing, Chi-na. It will utilize a booster as its full energy injector. On-axis swap-out injection is chosen as the baseline injec-tion scheme for the storage ring. As required by the stor-age ring, a beam with a bunch charge up to 2.5 nC is needed to be injected in the booster. However, limited by the transverse mode coupling instability (TMCI), such a high bunch charge is challenging. To overcome this problem, a lattice with a considerable large momentum compaction factor is designed. This paper reports the lattice design and physics studies of the HEPS booster, including injection and extraction design, error studies, eddy current effects, collective effects, and so on.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF062  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPMF063 The Considerations of Improving TMCI Threshhold on HEPS Booster lattice, linac, storage-ring, injection 1411
 
  • Y.M. Peng, J.L. Li, C. Meng, S. Pei, H.S. Xu
    IHEP, Beijing, People's Republic of China
 
  The High Energy Photon Source (HEPS) is proposed in Beijing, China. The on-axis swap-out injection scheme will be used in the storage ring mainly because of the small dynamic aperture. Therefore, the booster needs to store more than 2.5 nC bunch charge. Under this requirement, the transverse mode coupling instability (TMCI) at the injection energy becomes the bunch charge restriction in the booster. Several changes in booster and linac for improving bunch charge threshold limited by TMCI are considered. The details will be expressed in this paper.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF063  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPMF075 Lattice Studies of a Booster Synchrotron for PETRA IV lattice, emittance, damping, optics 1436
 
  • H.C. Chao
    DESY, Hamburg, Germany
 
  Associated with an upgrade study of the PETRA III light source toward ultra low-emittance is an upgrade study of the booster synchrotron. One possible solution obtained from a scaling of the ALBA booster to a circumference of 300 m is considered. It is based on a modified FODO lattice with combined function magnets and achromat straights. In this paper a method utilizing piecewise matchings supervised and optimized with evolutionary algorithm (PMSOEA) was devised to search the lattice. Some preliminary results are shown and discussed.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF075  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPAF007 A Scheme for Asynchronous Operation of the APS-U Booster Synchrotron injection, storage-ring, extraction, timing 1823
 
  • U. Wienands, T.G. Berenc, T. Fors, F. Lenkszus, N. Sereno, G.J. Waldschmidt
    ANL, Argonne, Illinois, USA
 
  Funding: Work supported by US DOE
The APS-U 6-GeV MBA storage ring will have 42 pm beam emittance and relatively tight acceptance. This requires limiting the beam emittance out of the Booster synchrotron which is achieved by operating the Booster off-momentum, thus manipulating the damping partitions. However, the much higher charge for the APS-U strongly favors injecting on momentum into the Booster for maximum acceptance. An rf-frequency ramping scheme is proposed to allow injecting on momentum and then moving the beam off momentum. The ramp is adjusted from cycle to cycle to vary the total time taken by the beam from injection to extraction, thus aligning the Booster bunch with any chosen MBA storage ring bucket. The two rf systems will not be locked at any time of the cycle. The proposed scheme is compatible with the existing synchronization of the APS injector cycle to the 60-Hz line voltage which induces a variation in the start time of the acceleration cycle. The scheme removes the need to realign the Booster ring for total path length while optimizing its operation for high charge acceleration. A ferrite tuner is being considered for dynamic tuning of the rf cavities.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAF007  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPAF022 Application of Machine Learning to Minimize Long Term Drifts in the NSLS-II Linac klystron, linac, network, operation 1867
 
  • R.P. Fliller, C. Gardner, P. Marino, R.S. Rainer, M. Santana, G.J. Weiner, X. Yang, E. Zeitler
    BNL, Upton, Long Island, New York, USA
 
  Funding: This manuscript has been authored by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy
Machine Learning has proven itself as a useful technique in a variety of applications from image recognition to playing Go. Artificial Neural Networks have certain advantages when used as a feedforward system, such as the predicted correction relies on a model built from data. This allows for the Artificial Neural Network to compensate for effects that are difficult to model such as low level RF adjustments to compensate for long term drifts. The NSLS-II linac suffers from long terms drifts from a number of sources including thermal drifts and klystron gain variations. These drifts have an effect on the injection efficiency into the booster, and if left unchecked, portions of the bunch train may not be injected into the booster, and the storage ring bunch pattern will ultimately suffer. In this paper, we discuss the application of Artificial Neural Networks to compensate for long term drifts in the NSLS-II linear accelerator. The Artificial Neural Network is implemented in python allowing for rapid development of the network. We discuss the design and training of the network, along with results of using the network in operation.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAF022  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPAG004 Automating Orbit Correction in the Main Injector 8 GeV Line controls, dipole, data-acquisition, operation 2070
 
  • K.J. Hazelwood, I. Kourbanis, G.E. Krafczyk, M.-J. Yang
    Fermilab, Batavia, Illinois, USA
 
  The Main Injector 8 GeV line (MI8 line) transports beam from Fermilab's Booster accelerator to either the Booster Neutrino experiments (BNB), the Recycler or the Main Injector. Often the orbit of the beam through the MI8 line differs depending on the beam destination. The beam is collimated in the MI8 line, so increasing intensities and repetition rates make controlling orbits through the collimators a necessity. The current method of regulating the MI8 line orbit with DC corrector settings is insufficient. A system named MITUNE is being developed to sample and categorize all beams through the MI8 line and automatically calculate and apply proper dipole corrector ramps to maintain desired orbits for pulses to any destination.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAG004  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPAK017 Low-level RF System for the SuperKEKB Injector LINAC linac, injection, controls, positron 2131
 
  • T. Matsumoto, M. Akemoto, D.A. Arakawa, H. Katagiri, T. Miura, F. Qiu, Y. Yano
    KEK, Ibaraki, Japan
  • M. Akemoto, T. Miura, F. Qiu
    Sokendai, Ibaraki, Japan
 
  The low-level RF (LLRF) system of the KEK injector linac has been upgraded for the SuperKEKB. As a major change, a low-emittance and high-current RF gun was installed to satisfy 40-times higher luminosity at the SuperKEKB. In order to balance the stable RF gun operation and the electron/positron beam acceleration, the phase shifter is developed and the configuration of main drive system in the LLRF system is modified. The present status and future plan of the LLRF system upgraded for the SuperKEKB will be reported.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAK017  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPAL034 Bunch Length Measurements Using Coherent Smith-Purcell Radiation With Several Gratings at CLIO radiation, detector, laser, experiment 2239
 
  • N. Delerue, S. Jenzer, V. Khodnevych, A. Migayron
    LAL, Orsay, France
  • J.P. Berthet, N. Jestin, J.-M. Ortega, R. Prazeres
    CLIO/ELISE/LCP, Orsay, France
 
  Funding: Financially supported by the Université Paris-Sud (programme "attractivité"), by the French ANR (contract ANR-12-JS05-0003-01) and by IN2P3.
Coherent Smith Purcell radiation allows the measurement of a beam longitudinal profile through the study of the emission spectrum of the radiation emitted when a grating is brought close from the beam. In order to increase the dynamic range of our measurements we have used several gratings and we report on the measured bunch form factor using this technique. We report on these measurements and on the background rejection used.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAL034  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPAL054 Digital Low Level Radio Frequency System for the Booster Ring of the Taiwan Photon Source LLRF, controls, cavity, operation 2298
 
  • Z.K. Liu, F.Y. Chang, L.-H. Chang, M.H. Chang, S.W. Chang, L.J. Chen, F.-T. Chung, Y.T. Li, M.-C. Lin, C.H. Lo, Ch. Wang, M.-S. Yeh, T.-C. Yu
    NSRRC, Hsinchu, Taiwan
 
  The purpose of a Low-Level Radio Frequency (LLRF) system is to control the accelerating cavity field amplitude and phase. For the Taiwan Photon Source (TPS) at NSRRC, the currently operating LLRF systems are based on analog technology. To have better RF field stability, precise con-trol and high noise reduction, a digital LLRF control sys-tems based on Field Programmable Gate Arrays (FPGA) was developed. We replaced the analog LLRF system with the digital version for the TPS booster ring at the beginning of 2018, and we will replace those in the storage rings in the future. Test results and operational performance of the TPS booster DLLRF system are reported here.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAL054  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPMF011 Design and Status of Sirius Light Source RF Systems cavity, storage-ring, LLRF, lattice 2391
 
  • R.H.A. Farias, A.P.B. Lima, L. Liu, F.S. Oliveira
    LNLS, Campinas, Brazil
 
  Sirius is the new synchrotron light source currently under construction at the site of the Brazilian Synchro-tron Light Laboratory (LNLS) in Campinas, Brazil. The facility comprises a 3 GeV electron storage ring, a full energy booster and a 150 MeV linac. This work provides a brief description of the RF system of the booster and storage ring, presenting their main characteristics and specification goals.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPMF011  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPML011 Garnet Ring Measurements for the Fermilab Booster 2nd Harmonic Cavity cavity, controls, solenoid, simulation 2700
 
  • R.L. Madrak, J.E. Dey, K.L. Duel, J. Kuharik, A.V. Makarov, W. Pellico, J. Reid, G.V. Romanov, M. Slabaugh, D. Sun, C.-Y. Tan, I. Terechkine
    Fermilab, Batavia, Illinois, USA
 
  A perpendicularly biased tuneable 2nd harmonic cavity is being constructed for use in the Fermilab Booster. The cavity's tuner uses National Magnetics AL800 garnet as the tuning media. For quality control, the magnetic properties of the material and the uniformity of the properties within the tuner must be assessed. We describe two tests which are performed on the rings and on their corresponding witness samples.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPML011  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPML012 Progress on the Construction of the Perpendicularly Biased 2nd Harmonic Cavity for the Fermilab Booster cavity, HOM, damping, impedance 2703
 
  • R.L. Madrak, J.E. Dey, K.L. Duel, M.R. Kufer, J. Kuharik, A.V. Makarov, R.D. Padilla, W. Pellico, J. Reid, G.V. Romanov, M. Slabaugh, D. Sun, C.-Y. Tan, I. Terechkine
    Fermilab, Batavia, Illinois, USA
 
  A perpendicularly biased tuneable 2nd harmonic cavity, designed for the Fermilab Booster, is being assembled for testing this summer (2018). The cavity will work at twice the frequency of the fundamental cavities, and will be on only during the injection and transition (or extraction) periods. The main purpose of adding this cavity is to improve beam capture and reduce losses as required by Fermilab's Proton Improvement Plan (PIP). After three years of testing and optimization, the cavity design has now been finalized and all constituent parts have been received. We report on the cavity final design and on the status of the construction.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPML012  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPML021 First Performance Results of the PIP2IT MEBT 200 Ω Kicker Prototype kicker, impedance, ISOL, target 2724
 
  • G.W. Saewert, M.H. Awida, B.E. Chase, A.Z. Chen, J. Einstein-Curtis, D. Frolov, K.S. Martin, H. Pfeffer, D. Wolff
    Fermilab, Batavia, Illinois, USA
  • S. Khole
    BARC, Trombay, Mumbai, India
  • D. Sharma
    RRCAT, Indore (M.P.), India
 
  Funding: This manuscript has been authored by Fermi Research Alliance, LLC under Contract No. DE-AC02-07CH11359 with the U.S. Department of Energy, Office of Science, Office of High Energy Physics
The PIP-II project is a program to upgrade the Fermilab accelerator complex. The PIP-II linac includes a 2.1 MeV Medium Energy Beam Transport (MEBT) section that incorporates a unique chopping system to perform arbi-trary, bunch-by-bunch removal of 162.5 MHz structured beam. The MEBT chopping system will consist of two identical kickers working together and a beam absorber. One design of two having been proposed has been a 200 Ω characteristic impedance traveling wave dual-helix kicker driven with custom designed high-speed switches. This paper reports on the first performance results of one prototype kicker built, installed and tested with beam at the PIP-II Injector Test (PIP2IT) facility. The helix deflector design details are discussed. The electrical performance of the high-speed switch driver operating at 500 V bias is presented. Tests performed were chopping beam at 81.25 MHz for microseconds as well as with a truly arbitrary pattern for 550 us bursts having a 45 MHz average switching rate and repeating at 20 Hz.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPML021  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THXGBD4 Sirius Light Source Status Report storage-ring, kicker, injection, MMI 2886
 
  • A.R.D. Rodrigues, F.C. Arroyo, O.R. Bagnato, J.F. Citadini, R.H.A. Farias, J.G.R.S. Franco, R. Junqueira Leao, L. Liu, S.R. Marques, R.T. Neuenschwander, C. Rodrigues, F. Rodrigues, R.M. Seraphim, O.H.V. Silva
    LNLS, Campinas, Brazil
 
  Sirius is a Synchrotron Light Source Facility based on a 4th generation 3 GeV low emittance electron storage ring that is under construction in Campinas, Brazil. Presently the main tunnel for the accelerators is ready to start installations. The Linac tunnel was delivered earlier and the 150 MeV Linac from SINAP is almost ready to start commissioning early May. Commissioning of the storage ring is expected to start by the end of this year (2018). In this paper we briefly review the overall project parameters and design concepts and focus on highlights from the main subsystems.  
slides icon Slides THXGBD4 [28.405 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THXGBD4  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPAF012 The Influence of Chromaticity on Transverse Single-Bunch Instability in the Booster of HEPS simulation, damping, injection, radiation 2968
 
  • H.S. Xu, N. Wang
    IHEP, Beijing, People's Republic of China
 
  The study of the transverse single-bunch instability has been carried out for the HEPS booster to double check whether the required single-bunch charge can be achieved. The chromaticity has been varied in our study to see how the threshold changes accordingly. Usually, the slightly positive chromaticity is expected for stabilizing the beam. However, our simulations show that the single-bunch threshold current drops significantly when the chromaticity becomes non-zero. We present the simulation methods and results in details in this paper. The analysis of the simulation results is also presented.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAF012  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPAF014 Studies of the Single-Bunch Instabilities in the Booster of HEPS impedance, storage-ring, lattice, injection 2971
 
  • H.S. Xu, Z. Duan, J.L. Li, Y.M. Peng, S.K. Tian, N. Wang
    IHEP, Beijing, People's Republic of China
 
  High Energy Photon Source (HEPS), which is proposed in China, is an ultra-low emittance storage ring based synchrotron light source. Because of the requirement of the relatively high single-bunch charge, the booster may suffer from the single-bunch instabilities. A preliminary impedance model has been developed for the studies of collective instabilities in the booster. Based on this impedance model, the longitudinal and transverse single-bunch instabilities have been studied.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAF014  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPAF087 Multi-Objective Optimization of an SRF Photoinjector with Booster Section for High Brightness Beam Performance cavity, emittance, brightness, gun 3193
 
  • E. Panofski, A. Jankowiak, T. Kamps, A. Neumann
    HZB, Berlin, Germany
 
  Several future accelerator projects, light sources and user experiments require high brightness electron beams. SRF photoinjectors operating in continuous-wave (cw) mode hold the potential to serve as an electron source generating beams of high average brightness and short bunch lengths. Different operation and design parameters of the SRF photoinjector impact the beam dynamics and thus the beam brightness. A universal multi-objective optimization program based on a genetic algorithm was developed to extract optimum gun parameter settings from Pareto-optimum solutions. After getting the first optimum results, the photoinjector is supplemented with a booster section downstream. The new optimization results are presented. Further, the optimization program is applied to evaluate the impact of the field flatness of the gun cavity on the high brightness performance.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAF087  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPAK034 Practical Betatron Tune Behavior During Acceleration in Scaling FFAG Rings at KURNS acceleration, betatron, proton, extraction 3287
 
  • Y. Ishi, Y. Fuwa, Y. Kuriyama, Y. Mori, H. Okita, T. Uesugi
    Kyoto University, Research Reactor Institute, Osaka, Japan
  • J.-B. Lagrange
    Imperial College of Science and Technology, Department of Physics, London, United Kingdom
 
  In scaling FFAG* accelerators, ideally, betatron tunes are fixed for each closed orbit concerned with the certain beam energy. Therefore, they should not vary during the acceleration. However, it is not the case since practical implementations of the magnetic field can not provide perfect scaling conditions. There are two types of radial scaling FFAG ring at Kyoto University Research Reactor Institute: one has no return yokes so called 'yoke free type' adopted by MAIN RING which has a large tune variations causing non negligible beam losses; the other has return yokes and filed clamps adopted by BOOSTER RING which has smaller tune variations compared with MAIN RING. We report the tune measurements and calculations based on 3-d magnetic field calculations about these two types of ring and discuss the scaling conditions in FFAG accelerators.
FFAG* : FFAG stands for fixed filed alternating gradient. It describes one the focusing scheme in the circular accelerator.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAK034  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPAK062 Bunch Compression of Flat Beams emittance, simulation, experiment, cavity 3368
 
  • A. Halavanau, P. Piot
    Northern Illinois University, DeKalb, Illinois, USA
  • D.J. Crawford, D.R. Edstrom, D. Mihalcea, S. Nagaitsev, P. Piot, A.L. Romanov, J. Ruan, V.D. Shiltsev
    Fermilab, Batavia, Illinois, USA
 
  Funding: This work is supported by the DOE contract No.DEAC02-07CH11359 to the Fermi Research Alliance LLC. A.H. is supported by the DOE under contract No. DE-SC0011831 with Northern Illinois University.
Flat beams can be produced via a linear manipulation of canonical angular momentum (CAM) dominated beams using a set of skew-quadrupole magnets. Recently such beams were produced at Fermilab Accelerator Science and Technology (FAST) facility. In this paper, we report the results of flat beam compression study in a magnetic chicane at an energy of E~32 MeV. Additionally, we investigate the effect of energy chirp in the round-to-flat beam transform. The experimental results are compared with numerical simulations.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAK062  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPAK091 Design of the New Proton Synchrotron Booster Absorber Scraper (PSBAS) in the Framework of the Large Hadron Collider Injection Upgrade (LIU) Project impedance, vacuum, proton, simulation 3444
 
  • L. Teofili, M. Migliorati
    Sapienza University of Rome, Rome, Italy
  • J.A. Briz Monago, M. Calviani, N. Chritin, J.J. Esala, S.S. Gilardoni, I. Lamas Garcia, J. Maestre, T. Polzin, T.L. Rijoff
    CERN, Geneva, Switzerland
  • T.L. Rijoff
    TU Darmstadt, Darmstadt, Germany
 
  The Large Hadron Collider (LHC) Injector Upgrade (LIU)Project at CERN calls for increasing beam intensity for the LHC accelerator chain. Some machine components will not survive the new beam characteristics and need to be rebuilt for the new challenging scenario. This is particularly true for beam intercepting devices (BIDs) such as dumps, collimators, and absorber/scrapers, which are directly exposed to beam impacts. In this context, this work summarizes conceptual design studies on the new Proton Synchrotron Booster (PSB) Absorber/Scraper (PSBAS), a device aimed at cleaning the beam halo at the very early stage of the PSB acceleration. This paper outlines the steps performed to fulfil the component design requirements. It discusses thermo-mechanical effects as a consequence of the beam-matter collisions, simulated with the FLUKA Monte Carlo code and ANSYS finite element software; and the impedance minimization study performed to prevent beam instabilities and to reduce RF-heating on the device.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAK091  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPAK126 Revised Optics Design for the JLEIC Ion Booster lattice, sextupole, injection, betatron 3537
 
  • E.W. Nissen, T. Satogata
    JLab, Newport News, Virginia, USA
 
  Funding: This material is based upon work supported by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics under contract DE-AC05-06OR23177.
We outline the recently redesigned booster for the pro-posed Jefferson Lab Electron Ion Collider (JLEIC). This booster will inject protons (or ions of equivalent rigidity) at 280 MeV and accelerate them to 8 GeV kinetic energy. To avoid transition crossing, the booster uses flexible momentum compaction (FMC) lattices to raise the transi-tion gamma above the reach of the machine. We also include several families of sextupoles to simultaneously control the chromaticities, and nonlinear dispersions that were excited by the FMC cells.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAK126  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPAL013 First Serial Magnetic Measurements of the NICA Collider Twin-Aperture Dipoles collider, dipole, storage-ring, superconducting-magnet 3645
 
  • M.M. Shandov, V.V. Borisov, A.V. Bychkov, A.M. Donyagin, O. Golubitsky, H.G. Khodzhibagiyan, S.A. Kostromin
    JINR, Dubna, Russia
  • I.I. Donguzov, M. A. Kashunin, V. A. Mykhailenko, T.A. Parfylo, A.V. Shemchuk, D.A. Zolotykh
    JINR/VBLHEP, Dubna, Moscow region, Russia
 
  NICA is a new accelerator complex under construction at the Joint Institute for Nuclear Research (JINR) in Dubna, Russia, to study properties of hot and dense baryonic matter. Magnetic system of the NICA collider includes 80 twin-aperture dipole and 86 quadrupole superconducting magnets. The collider twin-aperture magnet is 1.94 m long, 120 mm/70 mm (h/v) aperture with window-frame design similar to the Nuclotron magnet. The measurement of the magnetic field parameters is supported to be conducted for both apertures of each collider magnet. This paper describes magnetic measurements methods and the development of the dedicated system for serial dipole magnets of the NICA collider.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAL013  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPAL014 Serial Magnetic Measurements for the NICA Quadruple Magnets of the NICA Booster Synchrotron quadrupole, cryogenics, superconducting-magnet, collider 3649
 
  • A.V. Shemchuk
    JINR/VBLHEP, Dubna, Moscow region, Russia
  • V.V. Borisov, A.V. Bychkov, A.M. Donyagin, O. Golubitsky, H.G. Khodzhibagiyan, S.A. Kostromin, M.M. Shandov
    JINR, Dubna, Moscow Region, Russia
 
  NICA is a new accelerator collider complex under con-struction at JINR, Dubna. More than 250 superconducting magnets are needed for the NICA booster and collider. The NICA Booster magnetic system includes 48 quadrupole superconducting magnets. The rotating coils probe developed for series magnetic measurements of booster quadrupoles doublets, as well as measuring methods are described. Results of magnetic measurements in cryogenic conditions for 12 doublets are presented and discussed.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAL014  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPAL046 Energy-Savings for the TPS Booster RF System at the NSRRC in Taiwan controls, timing, injection, storage-ring 3748
 
  • F.-T. Chung, F.Y. Chang, L.-H. Chang, M.H. Chang, S.W. Chang, L.J. Chen, Y.T. Li, M.-C. Lin, Z.K. Liu, C.H. Lo, Ch. Wang, M.-S. Yeh, T.-C. Yu
    NSRRC, Hsinchu, Taiwan
 
  In this paper, we discuss an energy-savings control sys-tem for the Taiwan Photon Source (TPS) booster RF sys-tem. During top-up storage ring operation, a timing con-trol is activated to reduce the booster RF transmitter en-ergy consumption when no injection is required. When-ever injection into the TPS storage ring is needed, the booster RF transmitter is immediately adjusted to operat-ing conditions. This timing-control system will save an energy of 380, 000 kWh annually.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAL046  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPAL122 Beam Performance Study of an RF Structure to Accelerate or Bunch Low Energy Ion Beams rfq, space-charge, ISAC, bunching 3931
 
  • S.D. Rädel, S. Kiy, R.E. Laxdal, O. Shelbaya
    TRIUMF, Vancouver, Canada
 
  The 35.4MHz Radio Frequency Quadrupole (RFQ) at the ISAC-I facility at TRIUMF is designed to accelerate ions from an energy of 2.04 keV/u to 150 keV/u for a large range of mass-to-charge ratios (A/Q). A multi-harmonic, 11.8MHz, buncher is used to provide a time focus at the RFQ entrance. Due to limits in the ion source HV platform a boost in the energy is required for higher mass beams (20 ≤ A/Q ≤ 30) to provide energy matching into the RFQ. To achieve this, a 3-gap, 11.8 MHz RF booster has been installed into the ISAC-I facility downstream of the buncher and upstream of the RFQ. The device can operate as an accelerator to match into the RFQ or as a second pre-buncher to improve capture in the RFQ and reduce sensitivity to space charge. Proof-of-principle measurements demonstrating various aspects of the performance will be reported and compared against expectations.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAL122  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPMF017 Operation Improvements and Emittance Reduction of the ESRF Booster emittance, operation, quadrupole, SRF 4077
 
  • N. Carmignani, N. Benoist, J-F. B. Bouteille, M.G. Di Vito, F. Ewald, L. Farvacque, A. Franchi, O. Goudard, J.M. Koch, S. Lagarde, S.M. Liuzzo, B. Ogier, T.P. Perron, P. Raimondi, D. Robinson, F. Taoutaou, E.T. Taurel, P.V. Verdier, R. Versteegen, P. Vidal, S.M. White
    ESRF, Grenoble, France
 
  The ESRF storage ring will be replaced by the Extremely Brilliant Source (EBS) in 2020 and the equilibrium emittance will decrease from the present 4 nmrad to 134 pmrad. The current injector system, composed by a linac and a synchrotron booster, will be used to inject into the new storage ring. To increase the injection efficiency in the new storage ring, three methods to reduce the horizontal emittance of the booster have been considered and tested. This paper presents the studies and achievements in terms of operation improvements and emittance reduction.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMF017  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPMF021 ESRF Operation Status injection, SRF, operation, power-supply 4088
 
  • J.-L. Revol, J.C. Biasci, N. Carmignani, A. D'Elia, A. Franchi, L. Hardy, J. Jacob, I. Leconte, S.M. Liuzzo, H.P. Marques, T.P. Perron, E. Plouviez, P. Raimondi, B. Roche, K.B. Scheidt, L. Torino, S.M. White
    ESRF, Grenoble, France
 
  The European Synchrotron Radiation Facility (ESRF) is undergoing the second phase (2015-2022) of an Up-grade which concerns its infrastructure, beamlines and X-ray source. This paper reports on the present operational source performance, highlighting the most recent developments, and the preparation of the Extremely Brilliant Source project. The renovation of the injector and the recent operation in top-up mode are also detailed.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMF021  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPMF030 VSR Injector Upgrade at BESSY II cavity, injection, storage-ring, kicker 4110
 
  • T. Atkinson, P. Goslawski, J.G. Hwang, M. Ries
    HZB, Berlin, Germany
  • T. Flisgen, T. Mertens
    Helmholtz-Zentrum Berlin für Materialien und Energie GmbH (HZB), Berlin, Germany
 
  BESSY VSR is a fully funded project at the Helmholtz-Zentrum in Berlin (HZB). The objective is to produce simultaneously both long and short pulses in the storage ring. The implications for the existing injector systems and the upgrade strategy are presented. Envisaged is a global upgrade which includes additional accelerating structures to reduce the bunch length in the booster, orbit measurements and implementing longitudinal feedback.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMF030  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPMF052 The Swap-Out Injection Scheme for the High Energy Photon Source injection, storage-ring, kicker, extraction 4178
 
  • Z. Duan, J. Chen, Y.Y. Guo, Y. Jiao, J.L. Li, Y.M. Peng, J.Q. Wang, N. Wang, G. Xu, H.S. Xu
    IHEP, Beijing, People's Republic of China
 
  Funding: Work supported by Natural Science Foundation of China (No.11605212).
The on-axis swap-out scheme is a promising injection scheme for di raction-limited storage rings, since it only re- quires a rather small dynamic aperture and thus potentially allows a higher brightness compared to traditional o -axis injection schemes. However, a full charge injector is neces- sary for this scheme and its design can be nontrivial, in par- ticular to satisfy the large single bunch charge requirements in special lling patterns for timing experiments. In the High Energy Photon Source, we propose using the booster also as a high energy accumulator ring to recapture the spent bunches extracted from the storage ring, so as to relax the challenges in generation and acceleration of bunches with a high charge, and as a cost-e ective solution compared to building a dedicated full energy accumulator ring. In this paper, the beam dynamics issues of this scheme will be presented, trade-o s between the storage ring and booster beam parameters and hardware specifications will also be discussed.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMF052  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPMK058 RF Design of the X-band Linac for the EuPRAXIA@SPARC_LAB Project klystron, linac, electron, GUI 4422
 
  • M. Diomede
    Sapienza University of Rome, Rome, Italy
  • D. Alesini, M. Bellaveglia, B. Buonomo, F. Cardelli, E. Chiadroni, G. Di Raddo, R.D. Di Raddo, M. Diomede, M. Ferrario, A. Gallo, A. Ghigo, A. Giribono, V.L. Lollo, L. Piersanti, B. Spataro, C. Vaccarezza
    INFN/LNF, Frascati (Roma), Italy
  • N. Catalán Lasheras, A. Grudiev, W. Wuensch
    CERN, Geneva, Switzerland
 
  We illustrate the RF design of the X-band linac for the upgrade of the SPARC_LAB facility at INFN-LNF (EuPRAXIA@SPARC_LAB). The structures are travelling wave (TW) cavities, working on the 2π/3 mode, fed by klystrons with pulse compressor systems. The tapering of the cells along the structure and the cell profiles have been optimized to maximize the effective shunt impedance keeping under control the maximum value of the modified Poynting vector, while the couplers have been designed to have a symmetric feeding and a reduced pulsed heating. In the paper we also present the RF power distribution layout of the accelerating module and a preliminary mechanical design.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMK058  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPMK086 Low Intensity Electron Beam Measurement at SLRI Beam Test Facility electron, synchrotron, target, detector 4502
 
  • K. Kittimanapun, N. Chanlek, A. Lakrathok, N. Laoiamnongwong
    SLRI, Nakhon Ratchasima, Thailand
 
  Funding: This work is supported by the National Science and Technology Development Agency (NSTDA) under contract FDA-C0-2558-855-TH.
The SLRI Beam Test Facility (SLRI-BTF), the latest extension of the existing accelerator complex, has recently been in operation at the Synchrotron Light Research Institute (SLRI). SLRI-BTF is capable of providing electron test beams with desired intensity and energy. By means of a wedge target downstream of the 40-MeV linac, the electron intensity of the test beam produced is variable between a few to millions of electrons per burst. The test beam energy is adjustable from 40 MeV to 1.2 GeV, depending on the acceleration time of the synchrotron booster. SLRI-BTF targets to service electron test beams to the development of the high-energy particle detectors and diagnostic instrumentations. In this paper, the measurement of the low intensity electron beam will be discussed.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMK086  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPML073 Measurement of the RF Reference Phase Stability in the SuperKEKB Injector LINAC linac, klystron, controls, feedback 4815
 
  • N. Liu
    Sokendai, Ibaraki, Japan
  • D.A. Arakawa, H. Katagiri, T. Matsumoto, S. Michizono, T. Miura, F. Qiu, Y. Yano
    KEK, Ibaraki, Japan
 
  The SuperKEKB injector is a more than 600 m J-shaped LINAC. The requirement of the RF phase refer-ence stability is 0.1 degree (RMS) at 2856 MHz for SuperKEKB PHASE-2 commissioning. In order to clari-fy and improve the reference line performance, the RF reference phase stability is measured. The phase noise of the RF reference at each sector is shown in this paper. A new phase monitor system is implemented to measure the short-term stability and long-term drift due to the temperature and humidity fluctuations in the klystron gallery.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPML073  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)