Keyword: LabView
Paper Title Other Keywords Page
WEPAL064 Diagnosis Application by Great Amount Operation Data Analysis Program for Taiwan Photon Source quadrupole, power-supply, hardware, interface 2323
  • C.C. Liang, B.Y. Chen, C.H. Chen, S. Fann, C.S. Huang, C.H. Kuo, T.Y. Lee, W.Y. Lin, Z.-D. Tsai, Y.C. Yang, T.-C. Yu
    NSRRC, Hsinchu, Taiwan
  To find out abnormal situations of the machine for preventive maintenance or machine trip tracking or instability source diagnosis, a large amount of operating data in an accelerator is thus can be used to build a series data analysis program. When the archived data is classified accordingly, the standard deviation (STD), peak-to-peak value and other statistic indexes within the inspection time zone by the belonging families can be used to point out the especially abnormal signals. The analysis program adopts the techniques of parallel calculation and memory optimization to greatly reduce the time for data transmission and analysis and also displays the correlation signals to opera-tors for deeper analysis. This paper illustrated a simple yet effective method for quickly identifying a not-so-obscure hardware issue by simply using a personal computer (PC).  
DOI • reference for this paper ※  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
WEPAL067 Number of Turn Measurements on the HIPA Cyclotrons at PSI cyclotron, pick-up, proton, operation 2334
  • P.-A. Duperrex, A. Facchetti
    PSI, Villigen PSI, Switzerland
  The number of turns is an important parameter for the tuning of a cyclotron; it is even more important for high intensity machines such as the 1.4 MW High Intensity Proton Accelerator (HIPA) facility. Up to recently, the number of turns had to be measured using radial probes, which cannot be performed during user operation but only during beam development shifts. For user shifts, the estimate of the number of turns was based on the acceleration voltage measurements, with the inherent limited precision of RF measurements. A new scheme based on the time of flight (ToF) measurements has been deployed on the two cyclotrons of HIPA. It is based on the cross-correlation of fast sampled data from pickups located at the entrance and at the exit of the cyclotrons. For the first cyclotron, called Injector 2 (accelerating the beam from 870 keV to 72MeV), the beam had to be externally modulated whereas, for the Ring Cyclotron (72 MeV to 590 MeV), no external modulation was necessary. This paper will present the details of both implementations, their limitations and the quality of the results that can be obtained with the ToF techniques.  
DOI • reference for this paper ※  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)